Published at Sunday, November 05th, 2017 - 01:57:43 AM. fire pits design. By magaly basler.
The basic design The main functional feature of a fire pit is an excavated hole in the ground. This hole is usually circular and has a diameter of not less than 18 inches. Most fire pits will be between 2 and 3 feet in diameter and the base of the pit will be between 6 inches and one foot below the surrounding finished ground level. In order to make the fire pit more functional, more attractive and more versatile, a small wall is built around the perimeter of the pit. This enclosing wall will usually be between 12 to 18 inches high. It acts to contain the fire, tidy up the appearance and radiate and convect heat outwards from the fire pit. A more complete design also supplements the fire pit with some surrounding hard landscaping and masonry bench seating.
For wood burning fire pits always use a safety screen. They come in various shapes and sizes and will help contain sparks and flying embers. Some models are sold with them, however if you are building fire pit make sure you incorporate a screen into the design. Materials used in fire pits should be carefully considered. Porous stone, non treated river rocks and even cinder blocks should not be used inside a fire pit. When placed near intense heat, they can explode. Standard building bricks will eventually crack and need replacing over time. In order to prevent this fire pits should be lined with fire rated materials such as firebricks or thick steel rings. Use fire rated mortar. Adhesives are not advised as when heated they can give off unhealthy fumes.
Any content, trademark’s, or other material that might be found on the thgeneralstore website that is not thgeneralstore’s property remains the copyright of its respective owner/s. In no way does thgeneralstore claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.