Published at Sunday, November 05th, 2017 - 08:36:50 AM. fire pits design. By magaly basler.
The build 1. The first task is to find a suitable location. This should be away from buildings and other flammable materials and vegetation. The area should be generally flat and well drained. 2. Next, sand or chalk should be used to make a visible impression of the pits shape on the ground enabling the pit to be excavated. The base of the pit should be made of at least 6 inches of concrete, or better still 6 inches of compacted hardcore with a further 6 inches of concrete on top. This would require a dig of about 18 inches. This should require nothing more than a spade. Important: If you intend to build the "fire pit wall" on a concrete base, then the pit diameter should be adjusted to allow for the additional width of the fire pit wall. This will save the need for a separate footing. 3. Once the fire pit base is complete and the concrete has set, it will be possible to build the fire pit wall. The wall will run around the perimeter of the fire pit and enclose it. This wall may be made of loose-laid stone or brick, or of mortar bonded masonry. If the latter is the case, then an additional mortar layer can be used to line the internal surface of the wall. In either case the stones or bricks should be staggered for stability and appearance. 4. Whilst this completes the main fire pit project, pavers, paving slabs, cobbles or brick sets can be used to create a clean and hard wearing surface around the fire pit. Additionally, a simple but attractive seating area can be built around the fire pit by using the same style of stones or bricks to make a basic flat topped bench.
HEAT: Generally, heat is provided from an outside source, such as a match or spark, and then the fire produces enough of its own heat to be self-supporting. If we reduce the temperature of a burning substance below its kindling point, the fire in all fire pits will go out. Sometimes enough heat is generated within substances, such as in a pile of oily rags, to cause them to burst into flames. This is called spontaneous combustion. Certain bacteria in moist hay can cause the temperature to rise rapidly, causing the hay to burn. These sources of heat cannot be ignored when considering fire prevention and safety, and in deciding what to burn in your outdoor fire pit.
Any content, trademark’s, or other material that might be found on the thgeneralstore website that is not thgeneralstore’s property remains the copyright of its respective owner/s. In no way does thgeneralstore claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.